Origin of Salts: Difference between revisions
| Line 8: | Line 8: | ||
== Introduction == | == Introduction == | ||
Every naturally occurring liquid water can be seen as a salt solution at different degrees of dilution. This can be established by simple | Every naturally occurring liquid water can be seen as a salt solution at different degrees of dilution. This can be established by simple measurement of its electrical conductivity. Porous building materials like stone, brick, mortar and plaster contain salts in their pore space. Wherever water flows through porous materials and evaporates from the surface, eventually some amount of salt efflorescence will be found.<br> | ||
Some salts or salt-forming ions are introduced into the monument by human activity. | Some salts or salt-forming ions are introduced into the monument by human activity. Apart from the historical storage of salt or gun powder, alkaline building materials like water glass or Portland cement, were used extensively in some countries over the last century. Some damages previously referred to as a result of acid rain are now known to be due to these building materials. <bib id="Klemm.etal:1999" /> [[Road salt]] should be added to the list of these materials, because it can be detected on bridges and foundations (buildings were sometimes used for salt storage). | ||
All natural materials are contaminated with salt-forming ions, varying from low to very high levels. These include building materials like natural stone, brick and binding agents like lime or cement and surface coatings and paints. The substratum, subsoil consistency, ground- and surface water also play a role <bib id="Roesch.etal:1993" />. Besides natural emissions by volcanoes ((H<sub>2</sub>S, HCl, HF, SO<sub>2</sub> etc.) and sea- water aerosols (NaCl etc.), <bib id=Steiger.etal:1994b/><bib id=Steiger.etal:1997/><bib id=Steiger.etal:2002/><bib id=Becker.etal:2005/>, anthropogenic emissions are becoming more important. | All natural materials are contaminated with salt-forming ions, varying from low to very high levels. These include building materials like natural stone, brick and binding agents like lime or cement and surface coatings and paints. The substratum, subsoil consistency, ground- and surface water also play a role <bib id="Roesch.etal:1993" />. Besides natural emissions by volcanoes ((H<sub>2</sub>S, HCl, HF, SO<sub>2</sub> etc.) and sea- water aerosols (NaCl etc.), <bib id=Steiger.etal:1994b/><bib id=Steiger.etal:1997/><bib id=Steiger.etal:2002/><bib id=Becker.etal:2005/>, anthropogenic emissions are becoming more important. | ||
Revision as of 22:11, 11 December 2011
<bibimport/>
authors:Hans-Jürgen Schwarz
Back to Fundamentals
Abstract[edit]
Salts that cause damage to wall paintings and cultural heritage made of stone, brick and other building materials, originate from natural sources or human activities. They are present in seawater, groundwater and even rainwater, as well as in soil or some stones, such as those in flood plains or near the sea. They may be part of the natural cycle of the chemical and physical deterioration of stone. Salts originating from human activities can be linked to emissions from burning fossil fuels, agricultural activities, salt or gun powder storage, some cements and the use of deicing salts. Salts are formed by the accumulation of ions in the wall or on the surface of specific parts of a building, e.g., plinths. The accumulation of ions can be due to soluble salts leaching out of building materials, soil, stone, wet or dry deposits from the atmosphere, but it can also be caused by the metabolism of micro-organisms or anthropogenic intervention.
Introduction[edit]
Every naturally occurring liquid water can be seen as a salt solution at different degrees of dilution. This can be established by simple measurement of its electrical conductivity. Porous building materials like stone, brick, mortar and plaster contain salts in their pore space. Wherever water flows through porous materials and evaporates from the surface, eventually some amount of salt efflorescence will be found.
Some salts or salt-forming ions are introduced into the monument by human activity. Apart from the historical storage of salt or gun powder, alkaline building materials like water glass or Portland cement, were used extensively in some countries over the last century. Some damages previously referred to as a result of acid rain are now known to be due to these building materials. [Klemm.etal:1999]Title: Schwefelisotopenanalyse von bauschädlichen Sulfatsalzen an historischen Bauwerken
Author: Klemm, Werner; Siedel, Heiner
Road salt should be added to the list of these materials, because it can be detected on bridges and foundations (buildings were sometimes used for salt storage).
All natural materials are contaminated with salt-forming ions, varying from low to very high levels. These include building materials like natural stone, brick and binding agents like lime or cement and surface coatings and paints. The substratum, subsoil consistency, ground- and surface water also play a role [Roesch.etal:1993]Title: Damage to Frescoes caused by sulphate-bearing salts: Where does the salt come from?
Author: Rösch, Heinrich; Schwarz, Hans-Jürgen. Besides natural emissions by volcanoes ((H2S, HCl, HF, SO2 etc.) and sea- water aerosols (NaCl etc.), [Steiger.etal:1994b]Title: Determination of wet and dry depostion of atmospheric pollutants on building stones by field exposure experiments
Author: Steiger, Michael; Dannecker, Walter[Steiger.etal:1997]Title: Sea Salt in Historic Buildings: Deposition, Transport and Accumulation
Author: Steiger, Michael; Behlen, Andreas; Neumann, Hans-Herrmann; Willers, U.; Wittenburg, Christian[Steiger.etal:2002]Title: Immissionsbelastung durch salzbildende Stoffe und Wirkung auf mineralische Baustoffe
Author: Steiger, Michael; Behlen, Andreas; Wiese, Utz[Becker.etal:2005]Title: Luftschadstoffe und Natursteinschäden
Author: Becker, Karl-Heinz; Brüggerhoff, Stefan; Steiger, Michael; Warscheid, Thomas, anthropogenic emissions are becoming more important.
The generation of natural resources and energy, emissions from traffic and so forth, produce a great number of damaging substances, of which sulphur dioxide (with the secondary product sulphate)[Wittenburg.etal:1993]Title: Ein Vergleich von Schwefeldioxid-Depositionsgeschwindigkeiten auf Naturwerksteine aus verschiedenen experimentellen Ansätzen (Comparison of sulfur dioxide deposition velocities on building stones from different experiments)
Author: Wittenburg, Christian; Mangels, Henning; Wolf, Falk; Steiger, Michael; Bothmann, Thomas; Dannecker, Walter and nitrogen oxides (with the secondary product nitrate), are the most familiar. It is still not fully understood, how ozone (O3) and the large number of organic compounds participate in the destruction of cultural goods. Immissions mostly reach the objects through dry or wet deposition [Steiger.etal:1989]Title: Variability of aerosol size distributions above the North Sea and its implication to dry deposition estimates
Author: Steiger, Michael; Schulz, Michael; Schwikowski, Margit; Naumann, K.; Dannecker, Walter by rainwater or fog, but also through accumulation in the subsoil.
Nitrates and organic salts like oxalate mostly have a microbiological origin. While nitrates are transported into the object by humidity, oxalates are usually formed in situ, where they remain due to their low solubility.
Other sources for damaging salts can be fertilisers or detergents that are introduced through ground and surface water.
Literature[edit]
[Filter missing]