Origin of Salts: Difference between revisions

From Saltwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 9: Line 9:
Every naturally occurring liquid water can be seen as a salt solution with different degrees of dilution. This can be confirmed by simple measurement of its electrical conductivity. Porous building materials like stone, brick, mortar and plaster contain salts in their pore space. Wherever water flows through porous materials and evaporates from the surface, eventually some amount of salt efflorescence will be found.<br>
Every naturally occurring liquid water can be seen as a salt solution with different degrees of dilution. This can be confirmed by simple measurement of its electrical conductivity. Porous building materials like stone, brick, mortar and plaster contain salts in their pore space. Wherever water flows through porous materials and evaporates from the surface, eventually some amount of salt efflorescence will be found.<br>


Some salts or salt-forming ions are introduced into the monument by human activity. Apart from the historical storage of salt or gun powder, alkaline building materials like water glass or Portland cement, were used extensively in some countries over the last century. Some damages previously referred to as a result of acid rain are now known to be due to the use of these materials. <bib id="Klemm.etal:1999" />  [[Deicing salts]] should be added to the list of these materials, because they are still being used and they will affect mostly bridges, tunnels and foundations of buildings near roads. Other sources for damaging salts can be fertilizers and detergents that are introduced through ground and surface water. Finally, cleaning interventions based on the use of alkaline materials followed by an acid rinse, can leave soluble salts behind. This cleaning approach is used for brick masonry in some countries.  
Some salts or salt-forming ions are introduced into the monument by human activity. Monuments may be contaminated due to [[Salts in restoration materials|consolidants and and cleaning agents]] but also due to historical storage of salt or gun powder, alkaline [[Salts in building materials containing salts|building materials]] like water glass or Portland cement, were used extensively in some countries over the last century. Some damages previously referred to as a result of acid rain are now known to be due to the use of these materials. <bib id="Klemm.etal:1999" />  [[Deicing salts]] should be added to the list of these materials, because they are still being used and they will affect mostly bridges, tunnels and foundations of buildings near roads. Other sources for damaging salts can be fertilizers and detergents that are introduced through ground and surface water. Finally, cleaning interventions based on the use of alkaline materials followed by an acid rinse, can leave soluble salts behind. This cleaning approach is used for brick masonry in some countries.  
    
    
All natural materials are contaminated with salt-forming ions, varying from low to very high levels. These include building materials, e.g., natural stone or brick, and binding agents, such as lime, cement and renders. The substratum, subsoil consistency, ground- and surface water also play a role <bib id="Roesch.etal:1993" />. Besides natural emissions by volcanoes ((H<sub>2</sub>S, HCl, HF, SO<sub>2</sub> etc.) and sea- water aerosols (NaCl etc.), <bib id="Steiger.etal:1994b"/><bib id="Steiger.etal:1997"/><bib id="Steiger.etal:2002"/><bib id="Becker.etal:2005"/>, anthropogenic emissions are becoming more important.
All natural materials are contaminated with salt-forming ions, varying from low to very high levels. These include building materials, e.g., natural stone or brick, and binding agents, such as lime, cement and renders. The substratum, subsoil consistency, ground- and surface water also play a role <bib id="Roesch.etal:1993" />. Besides natural emissions by volcanoes ((H<sub>2</sub>S, HCl, HF, SO<sub>2</sub> etc.) and sea- water aerosols (NaCl etc.), <bib id="Steiger.etal:1994b"/><bib id="Steiger.etal:1997"/><bib id="Steiger.etal:2002"/><bib id="Becker.etal:2005"/>, anthropogenic emissions are becoming more important.
Line 15: Line 15:
The generation of energy, emissions from traffic and so forth, produce a great number of damaging substances, of which sulfur dioxide (with the secondary product sulphate)<bib id="Wittenburg.etal:1993"/> and nitrogen oxides (with the secondary product nitrate), are the most familiar. It is still not fully understood, how ozone (O3) and the large number of organic compounds participate in the destruction of cultural property. Immissions mostly reach the objects through dry or wet deposition <bib id="Steiger.etal:1989"/>  by rainwater or fog, but also through accumulation in the subsoil.
The generation of energy, emissions from traffic and so forth, produce a great number of damaging substances, of which sulfur dioxide (with the secondary product sulphate)<bib id="Wittenburg.etal:1993"/> and nitrogen oxides (with the secondary product nitrate), are the most familiar. It is still not fully understood, how ozone (O3) and the large number of organic compounds participate in the destruction of cultural property. Immissions mostly reach the objects through dry or wet deposition <bib id="Steiger.etal:1989"/>  by rainwater or fog, but also through accumulation in the subsoil.


Nitrates and organic salts such as oxalates mostly have a microbiological origin. While nitrates are transported into the object by humidity, oxalates are usually formed in situ, where they remain due to their low solubility.
Nitrates and organic salts such as oxalates mostly are of [[microbiological origin]]. While nitrates are transported into the object by humidity, oxalates are usually formed in situ, where they remain due to their low solubility.


== Literature ==
== Literature ==

Revision as of 08:38, 9 August 2012

Author:Hans-Jürgen Schwarz

Back to Fundamentals

Abstract[edit]

Salts that cause damage to wall paintings and cultural heritage made of stone, brick and other inorganic building materials, originate from natural sources or human activities. They are present in seawater, groundwater and even rainwater, as well as in soil or some stones, such as those in flood plains or near the sea. They may be part of the natural cycle of the chemical and physical deterioration of stone. Salts originating from human activities can be linked to emissions from burning fossil fuels, agricultural activities, salt or gun powder storage, some cements and the use of deicing salts. Salts are formed by the accumulation of ions in the wall or on the surface of specific parts of a building, e.g., plinths. The accumulation of ions can be due to soluble salts leaching out of building materials, soil, stone, wet or dry deposits from the atmosphere, but it can also be caused by the metabolism of micro-organisms or anthropogenic intervention.

Introduction[edit]

Every naturally occurring liquid water can be seen as a salt solution with different degrees of dilution. This can be confirmed by simple measurement of its electrical conductivity. Porous building materials like stone, brick, mortar and plaster contain salts in their pore space. Wherever water flows through porous materials and evaporates from the surface, eventually some amount of salt efflorescence will be found.

Some salts or salt-forming ions are introduced into the monument by human activity. Monuments may be contaminated due to consolidants and and cleaning agents but also due to historical storage of salt or gun powder, alkaline building materials like water glass or Portland cement, were used extensively in some countries over the last century. Some damages previously referred to as a result of acid rain are now known to be due to the use of these materials. [Klemm.etal:1999]Title: Schwefelisotopenanalyse von bauschädlichen Sulfatsalzen an historischen Bauwerken
Author: Klemm, Werner; Siedel, Heiner
Link to Google Scholar
Deicing salts should be added to the list of these materials, because they are still being used and they will affect mostly bridges, tunnels and foundations of buildings near roads. Other sources for damaging salts can be fertilizers and detergents that are introduced through ground and surface water. Finally, cleaning interventions based on the use of alkaline materials followed by an acid rinse, can leave soluble salts behind. This cleaning approach is used for brick masonry in some countries.

All natural materials are contaminated with salt-forming ions, varying from low to very high levels. These include building materials, e.g., natural stone or brick, and binding agents, such as lime, cement and renders. The substratum, subsoil consistency, ground- and surface water also play a role [Roesch.etal:1993]Title: Damage to Frescoes caused by sulphate-bearing salts: Where does the salt come from?
Author: Rösch, Heinrich; Schwarz, Hans-Jürgen
Link to Google Scholar
. Besides natural emissions by volcanoes ((H2S, HCl, HF, SO2 etc.) and sea- water aerosols (NaCl etc.), [Steiger.etal:1994b]Title: Determination of wet and dry depostion of atmospheric pollutants on building stones by field exposure experiments
Author: Steiger, Michael; Dannecker, Walter
Link to Google Scholar
[Steiger.etal:1997]Title: Sea Salt in Historic Buildings: Deposition, Transport and Accumulation
Author: Steiger, Michael; Behlen, Andreas; Neumann, Hans-Herrmann; Willers, U.; Wittenburg, Christian
Link to Google Scholar
[Steiger.etal:2002]Title: Immissionsbelastung durch salzbildende Stoffe und Wirkung auf mineralische Baustoffe
Author: Steiger, Michael; Behlen, Andreas; Wiese, Utz
Link to Google Scholar
[Becker.etal:2005]Title: Luftschadstoffe und Natursteinschäden
Author: Becker, Karl-Heinz; Brüggerhoff, Stefan; Steiger, Michael; Warscheid, Thomas
Link to Google Scholar
, anthropogenic emissions are becoming more important.

The generation of energy, emissions from traffic and so forth, produce a great number of damaging substances, of which sulfur dioxide (with the secondary product sulphate)[Wittenburg.etal:1993]Title: Ein Vergleich von Schwefeldioxid-Depositionsgeschwindigkeiten auf Naturwerksteine aus verschiedenen experimentellen Ansätzen (Comparison of sulfur dioxide deposition velocities on building stones from different experiments)
Author: Wittenburg, Christian; Mangels, Henning; Wolf, Falk; Steiger, Michael; Bothmann, Thomas; Dannecker, Walter
Link to Google Scholar
and nitrogen oxides (with the secondary product nitrate), are the most familiar. It is still not fully understood, how ozone (O3) and the large number of organic compounds participate in the destruction of cultural property. Immissions mostly reach the objects through dry or wet deposition [Steiger.etal:1989]Title: Variability of aerosol size distributions above the North Sea and its implication to dry deposition estimates
Author: Steiger, Michael; Schulz, Michael; Schwikowski, Margit; Naumann, K.; Dannecker, Walter
Link to Google Scholar
by rainwater or fog, but also through accumulation in the subsoil.

Nitrates and organic salts such as oxalates mostly are of microbiological origin. While nitrates are transported into the object by humidity, oxalates are usually formed in situ, where they remain due to their low solubility.

Literature[edit]

[Becker.etal:2005]Becker, Karl-Heinz; Brüggerhoff, Stefan; Steiger, Michael; Warscheid, Thomas (2005): Luftschadstoffe und Natursteinschäden. In: Siegesmund, Siegfried; Auras, Michael; Snethlage, Rolf (eds.): STEIN. Zerfall und Konservierung, Edition Leipzig, 35-45.Link to Google Scholar
[Klemm.etal:1999] Klemm, Werner; Siedel, Heiner (1999): Schwefelisotopenanalyse von bauschädlichen Sulfatsalzen an historischen Bauwerken, Wiss. Mitt. Inst. Geol. TU Bergakademie FreibergLink to Google Scholar
[Roesch.etal:1993]Rösch, Heinrich; Schwarz, Hans-Jürgen (1993): Damage to Frescoes caused by sulphate-bearing salts: Where does the salt come from?. In: Studies in Conservation, 38 (4), 224-230, UrlLink to Google ScholarFulltext link
[Steiger.etal:1989]Steiger, Michael; Schulz, Michael; Schwikowski, Margit; Naumann, K.; Dannecker, Walter (1989): Variability of aerosol size distributions above the North Sea and its implication to dry deposition estimates. In: Journal of Aerosol Science, 20 (8), 1229-1232Link to Google Scholar
[Steiger.etal:1994b]Steiger, Michael; Dannecker, Walter (1994): Determination of wet and dry depostion of atmospheric pollutants on building stones by field exposure experiments. In: Zezza, Fulvio; Ott, Heinrich; Fassina, Vasco (eds.): The conservation of monuments in the Mediterranean Bassin: Stone and Monuments: Methodologies for the Analyses of Weathering and Conservation, , proceedings of the 3rd international symposium, Venice, 22-25 June 1994, , 171-178.Link to Google Scholar
[Steiger.etal:1997]Steiger, Michael; Behlen, Andreas; Neumann, Hans-Herrmann; Willers, U.; Wittenburg, Christian (1997): Sea Salt in Historic Buildings: Deposition, Transport and Accumulation. In: Moropoulou, A.; Zezza, F.; Kollias, E.; Papachristodoulou, I. (eds.): 4th International Symposium on the Conservation of Monuments in the Mediterranean - Proceedings, , 325-335.Link to Google Scholar
[Steiger.etal:2002]Steiger, Michael; Behlen, Andreas; Wiese, Utz (2002): Immissionsbelastung durch salzbildende Stoffe und Wirkung auf mineralische Baustoffe. In: Institut für Steinkonservierung Mainz (eds.): Salze im historischen Mauerwerk, IFS, Mainz, 1-10.Link to Google ScholarFulltext link
[Wittenburg.etal:1993]Wittenburg, Christian; Mangels, Henning; Wolf, Falk; Steiger, Michael; Bothmann, Thomas; Dannecker, Walter (1993): Ein Vergleich von Schwefeldioxid-Depositionsgeschwindigkeiten auf Naturwerksteine aus verschiedenen experimentellen Ansätzen (Comparison of sulfur dioxide deposition velocities on building stones from different experiments). In:: VDI-Berichte 1060 (Materialien in ihrer Umwelt), , 383-392.Link to Google Scholar