Thenardite

<bibimport/>

Thenardite
Mineralogical name	Thenardite
Chemical name	Sodium sulfate
Trivial name	Pyrotechnite
Chemical formula	Na2SO4
Other forms	Mirabilite (Na2SO4•10H2O) Sodiumsulfate heptahydrate (Na2SO4•7H2O)
Crystal system	orthorhombic
Crystal structure
Deliquescence humidity 20°C	81.7% (25°C)
Solubility (g/l) at 20°C	162 g/l
Density (g/cm³)	2.689 g/cm³
Molar volume	53.11 cm3/mol
Molar weight	142.04 g/mol
Transparency	transparent to translucent
Cleavage	perfect
Crystal habit
Twinning
Phase transition
Chemical behavior
Comments	soluble in water and glycerin, not soluble in pure alcohol
Crystal Optics
Refractive Indices	nx = 1.468 ny = 1.473 nz = 1.483
Birefringence	Δ = 0.015
Optical Orientation	positive
Pleochroism
Dispersion
Used Literature
{{{Literature}}}

Authors: Hans-Jürgen Schwarz , Michael Steiger, Tim Müller
English translation: Matthieu Angeli
back to Sulfate

Sodium sulfate and thenardite

Abstract

Sodium sulfate and its phases thenardite, mirabilite and the heptahydrate, whose importance in the production of damage has been identified, are described.

Occurence

Both thenardite like mirabilite appear as natural minerals. Sodium sulfate appears in Nature in mineral waters in the form of double salts, as deposits of former salt lakes. Knowledge of the hydrated sodium sulfate dates back to the 16th Century. Its first description has been written by Glauber in 1658, in which he described it as "sal mirable". It is also quite common to read the name "Glauber's salt" for mirabilite in the literature.

Information on the origin and formation of thenardite / mirabilite in monuments

With the entry of materials that contain soluble sodium compounds, the mineral system of a monument may create sodium sulfate as salt efflorescence when acting with various sources of sulfate such as for example sulphurous gases or contaminated air. Cement exhibits a high content of sodium ions, as they are allowed by the German Standardization Institute to contain up to 0.5 % of soluble alkalis. This means that 100 kg of Portland cement containing only 0.1% soluble Na₂O can form 520g of Mirabilite when in contact with air containing sulfuric acid [calculation from Arnold/Zehnder 1991]. Sodium ions can also enter into monuments from a plethora of cleaning materials and especially older restoration products (such as water glass). Ground water and surface water are also a possible source of Na⁺-ions. Road salt consists to a large part of slightly soluble sodium chloride. Finally, in the coastal areas, sea water is also a significant source of NaCl.

Solubility behavior

Figure1: Solubility of Na2SO4 in water, Graph: M. Steiger

The structures of both thenardite and mirabilite belong to the group of easily soluble salts and therefore easily mobilizable (see Table hygroscopicity of the salts and ERH). The solubility of sodium sulfate is highly dependent on temperature. For this reason, a rapid drop of temperature is highly likely to yield very high supersaturation and salt crystallization.

Hygroscopicity

Figure2:Deliquescence of Na2SO4, Graph: M. Steiger

The temperature effect on the deliquescence points of thenardite and mirabilite is shown below. The striking features here are the opposite curve transitions. In the presence of other ions (in salt mixtures), the parameters of the equilibrium moisture content as well as the necessary temperature and humidity conditions for recrystallization change significantly. The following table shows experimental data of equilibrium moisture for different salt mixtures at different temperatures.It turns out that all the values ​​of equilibrium moisture content are lower than those of pure salt mirabilite (see table equilibrium moisture content as a function of temperature).

Tabelle 1 - Information about the equilibrium moisture of saturated solid solutions (mixing ratio: saturated sol.A / saturated sol.B = 1:1) [Vogt.etal:1993]Title: Der Einfluss hygroskopischer Salze auf die Gleichgewichtsfeuchte und Trocknung anorganischer Baustoffe
Author: Vogt, R.; Goretzki, Lothar

	MgSO4	Ca(NO3)2	KNO3
Na2SO4 • 10H2O	87(21°C)	74 (21°C)	81(21°C)

Water vapor sorption:

Figure 3: Deliquescence points of pure salts thenardite and mirabilite [Arnold.etal:1991]Title: Monitoring Wall Paintings Affected by soluble Salts
Author: Arnold, Andreas; Zehnder, Konrad

The table below shows additional information for estimating the hygroscopicity of sodium sulfate for the sorption behavior of pure salt and the mixture with Halite at different relative humidities:

Table 2: Moist sorption of sodium sulphate in M.% after 56 days of storage [after Vogt/Goretzki 1993]

Air humidity	87% r.F.	81% r.F.	79% r.F.
Na2SO4	79	0	0
Na2SO4+NaCl (1:1 molare Mischung)	157	32	15

Crystallization pressure

When crystallizing from an aqueous solution, the crystallization pressure of thenardite lies in the 29.2-34.5 N/mm² range. These values are higher that those calculated for other building-damaging salts [Winkler:1975]Title: Stone: Properties, Durability in Man´s Environment
Author: Winkler, Erhard M.
.

Hydration behavior

Error creating thumbnail:

Conversion of mirabilite (?) into thenardite

The Na₂SO₄ – H₂O system:

The only stable forms are the decahydrate (Mirabilite) and the anhydrite (Thenardite). The generation of mirabilite by recrystallization of the salt from an aqueous supersaturated solution occurs at 32.4°C. In particular, the transition from thenardite to mirabilite and the incorporation of 10 water molecules in the crystal lattice causes a volume expansion of 320%. This transition happening at a relatively low temperature (32-35°C), the damage caused by this salt is highly dependent on the temperature and thus on the environment. This temperature range is given as a guide, as this transition could happen for example at 25°C at 80% relative humidity, or even at 0°C at 60.7% relative humidity [information from Gmelin]. Because of this strong dependence on the environmental parameters, an estimate of the damage caused on buildings by crystallization and hydration of sodium sulfate are very difficult to obtain.

Pictures of salt and salt damage

In the field

• Thenardite efflorescences
• 

  Thenardite crystals on a wall in the old church in Idensen,Germany

• Eilsum Gipsausbluehungen.jpg

  Thenardite efforesceneces in the Ev. Ref. church in Eilsum, Germany

Under the polarizing microscope

• Sodium sulfate crystals between to glass plates
• 

  plain polarized light

• 

  crossed polarisers, red I

• 

  plain polarized light

• 

  crossed polarisers

• 

  crossed polarisers, red I

• 

  plain polarized light

• 

  crossed polarisers, red I

• 

  plain polarized light

• 

  plain polarized light

• 

  crossed polarisers, red I

• Sodium sulfate crystals, crystallised out of a water extraction of a real sample
• 

  plain polarized light

• 

  plain polarized light

Literature

[Filter missing]

A phase is a physically distinctive form of matter and is characterized by having relatively uniform chemical and physical properties.

crystallization of a dissolved salt

Water glass is the common name for a liquid solution of alkaline silicates, also known as Sodium silicate Na2SiO3 or liquid glass.