Templates: Difference between revisions

From Saltwiki
Jump to navigation Jump to search
No edit summary
(86 intermediate revisions by 7 users not shown)
Line 1: Line 1:
Templates for use in your articles you find below.
<accesscontrol>autor</accesscontrol>
Here you can find all of the templates previously made available for authors. If you would like additional templates, please contact the administrator at the Hornemann Institute.  


If you need a special template for use in your articles, please let me know on my discussion page [[user:Hschwarz|Hans-Jürgen Schwarz]]




== Classification of an article in SaltWiki ==


== Outline of an article in SalzWiki ==
Each article tackles a self-contained subject. Explanations of terms can generally be found in the glossary. A Wiki article concentrates on the actual content and is linked to all subjects that are required or are important for understanding the article.<br>
 
The classification could look as follows (for example, see the article on render/mortar):
The following are suggestions for the outline of an article in SalzWiki.
Each page starts with the page head, as proposed below.
 
Each article is a self-contained topic. Definitions are usually carried out in the glossary. If necessary, you can also do so in a separate article.
A Wiki article focuses on the actual content and links on all topics that are provided and and are important for the understanding of the article.
 
The outline might look like (see e.g. the article [[NN]]):
 
Each page starts with the head of the page, as suggested below:
 
<pre>
<pre>
== Abstract ==
== Abstract ==
== Introduction ==
== Introduction ==
 
== Main chapter ==
== Main chapter==
=== Sub-chapter ===
 
== Web links ==
=== Sub-chapter===
 
== Web-links ==
 
== Literature ==
== Literature ==


<bibprint/> : to use if at least one quote in Bibtex format is present in the text, otherwise the complete list of references is displayed!
<bibprint/> : to use if at least one quote in Bibtex format is present in the text,  
              otherwise the complete list of references is displayed!


</pre>
</pre>




If there are more than three headlines, the software automatically creates a table of contents that is inserted before the first heading.
If there are more than three headings, then the software will automatically create a table of contents inserted before the first heading.
 
Terms in an article that are already addressed in SaltWiki on a separate page, should be linked to these pages(Formatting tab: Internal Link).
 
Do you plan to write to a term, used in your article, a new, not yet existing article then you can put a link to that term. This link will be displayed in red, while links to existing articles are displayed in blue. On the exact spelling of existing articles is to pay attention to(uppercase and lowercase letters are different), otherwise any existing articles will not be displayed.  


== Head of a page ==
== Head of a page ==
Line 45: Line 29:
<pre>
<pre>
<bibimport/>                 
<bibimport/>                 
Author/s: [[user:Hschwarz|Hans-Jürgen Schwarz]]


''back to [[SalzWiki:Portal|SalzWiki]]           
''back to [[SalzWiki:Portal|SalzWiki]]           
Line 54: Line 39:
|-
|-
| <nowiki><bibimport/></nowiki>  
| <nowiki><bibimport/></nowiki>  
| allows the citation from the bibliography <br>
| Allows quotation from the bibliography <br>
|-
|-
|<nowiki>'''Author/s:''' [[user:Hschwarz|Hans-Jürgen Schwarz]] </nowiki>         
|<nowiki>'''Author/s:''' [[user:Hschwarz|Hans-Jürgen Schwarz]] </nowiki>         
|Please insert author names, separated by commas. With ''user:"Author Name"'' is referred to the author page <br>
|Insert author name here, separated by commas in the case of several. <nowiki>[[User:"Author name"]]</nowiki> links to the author page <br>
|-
|-
|<nowiki>back to [[SalzWiki:Portal|SalzWiki]]</nowiki>             
|<nowiki>back to [[SalzWiki:Portal|SalzWiki]]</nowiki>             
|back link, here to SalzWiki
|Optional: go back one level, here to the SaltWiki site
|-
|-
|<nowiki>[[Category:"Topic"]] [[Category:"Author"]] [[Category:"Editor"]] [[Category:"Status"]] </nowiki>  
|<nowiki>[[Category:"Topic"]] [[Category:"Author"]] [[Category:"Editor"]] [[Category:"Status"]] </nowiki>  
|Categories are very important and have to be entered. The categories appear at the bottom of a page. For choosing the right category use the ''category tree'' link.  
|Categories are very important and must be entered. The categories always appear at the end of a page .  
|}
|}
<br clear=all>
== Licences ==
In order to insert a licence, you only need to state the short form, including the curly brackets. If you need another licence please contact the [[user:Hschwarz|admin]] on his talk page .


== Licenses ==
===Creative-Commons-Licence: CC_BY-NC-SA_3.0 ===


So far the following licenses are used for all files in the repository. To add a license, please insert the short form including the double curly brackets. Compare this to what you read in the text editing mode. If you need another license please contact the admin on his discussion page([[Hschwarz]]
The template: <nowiki>{{CC-by-nc-sa}}</nowiki>


<nowiki>{{CC_BY-NC-SA_3.0}}</nowiki>
{{CC-by-nc-sa}}


{{CC_BY-NC-SA_3.0}}
===Creative-Commons-Licence: CC_BY-NC-ND_3.0===
The template:<nowiki>{{CC-by-nc-nd}}</nowiki>


{{CC-by-nc-nd}}


<nowiki>{{CC_BY-NC-ND_3.0}}</nowiki>
===GNU===
The template:<nowiki>{{GNU}}</nowiki>


{{CC_BY-NC-ND_3.0}}
{{GNU}}


<nowiki>{{PD}}</nowiki>
===Public Domain Licence===
The template:<nowiki>{{PD}}</nowiki>


{{PD}}
{{PD}}


== Upload of Metadata ==
== Uploading metadata ==
 
On the upload page you will find templates for the meta-data of the different files you want to upload.


The following templates are available for metadata for different files that you may want to upload (there is also a link to them on the upload page)
* Photos
* Photos
* Published articles / books etc.
* Published articles/books, etc.
* Grey literature
* Grey literature
* Unpublished reports
* Unpublished reports
* Scientific primary data
* Scientific primary data
* DOI meta data
* DOI metadata


Please copy the appropriate template in the upload form and fill it out completely.
Please copy the relevant template into the upload form and complete it in full


{|cellspacing="0" cellpadding = "10" style="border-style:solid; border-color:black; border-width:1px;"
{|cellspacing="0" cellpadding = "10" style="border-style:solid; border-color:black; border-width:1px;"
|align="center" bgcolor="#ffff99" |By uploading, you confirm that the uploaded document / file is free of rights of third parties respectively you have permission to use.
|align="center" bgcolor="#ffff99" |By uploading, you confirm that the uploaded document / file is free of rights of third parties respectively you have permission to use.
|}
|}


Uploading is in the repository. To embed a file (eg a photo) in SalzWiki, you need to know the name of the file in the repository.  
Uploading is in the repository. To embed a file (eg a photo) in SaltWiki, you need to know the name of the file in the repository.  


Here as an example:
Here as an example:


Appearance of the template:
Call up the template using: <pre>{{MetadataPhoto_upload}}</pre>
{{MetadataPhotoUpload}}
 
<noinclude>
Appearance of the template for photos:
{{MetadataPhoto_upload}}
'''Master copy'''
'''Master copy'''
<pre>{{MetadataPhotoUpload
<pre>
|Description=
{{MetadataPhoto_upload
|Source =
|description=
|Date =
|source=
|Author/s =
|date=
|Permission=
|author=
|Notes=
|permission=
|notes=
}}
}}
</pre>
</pre>
</noinclude>
== Infobox Salts ==


When you create a page of a new salt, please use the template "Infobox_Salt" for the table with the characteristics of a salt. If the Infobox_Salt does not include all the desired parameters you need, please contact [[user: Hschwarz | Hans-Jürgen Schwarz]] and write your desired parameters on the talk page.
== Salts information box: Infobox Salts ==


Appearance: {{Infobox_Salt}}
If you want to create the page of a new salt, please use this template for the characteristics. Should the salts information box not have all of the required parameters that you need, please contact [[user:Hschwarz| the admin]]or write your required parameter on the discussion page.


<noinclude>
Appearance of the template {{Infobox_Salt}}


=== Master copy===
''' Master copy'''
<pre>{{Infobox_Salz
<pre>{{Infobox_Salt
|Footnote=
|Footnote             =
|bild =
|photo                = [[Image:"file name"|300px]]
|mineralogischerName=
|mineralogical_Name  =
|chemischerName =
|chemical_Name        =
|Trivialname =
|Trivial_Name        =
|chemFormel =
|chemicalFormula      =
|Hydratformen =
|Hydratforms          =
|Kristallklasse =
|Crystal_Class        =
|Deliqueszenzfeuchte =
|Deliqueszenzhumidity =
|Löslichkeit=
|Solubility          =
|Dichte =
|Density              =
|Molvolumen =
|MolVolume            =
|Molgewicht =
|Molweight            =
|Transparenz =
|Transparency        =
|Spaltbarkeit =
|Cleavage            =
|Kristallhabitus =
|Crystal_Habit        =
|Zwillingsbildung =
|Twinning            =
|Brechungsindices =
|Refractive_Indices  =
|Doppelbrechung =
|Birefringence        =
|optOrientierung=
|optical_Orientation  =
|Pleochroismus =
|Pleochroism          =
|Dispersion =
|Dispersion           =
|Phasenübergang =
|Phase_Transition    =
|chemVerhalten =
|chemBehavior        =
|Bemerkungen =
|Comments            =
}}
}}
</pre>
</pre>
Line 159: Line 151:
<br clear=all>
<br clear=all>


== Table with heading ==
== Table with table heading ==


;Format specifications for a table with 3 columns and 3 rows.<br>
In order to create a table, you can either use the Editor button or use the following template:
:width= "52%"            //  specifies the table width in % of page width<br>
<br clear="all">                
:align="left"            // left, right = right justified, center = centered<br>
{|border="2" cellspacing="0" cellpadding="4" width="52%" align="left" class="wikitable sortable"
:bgcolor = "#FFFF99"|    // specifies the background color for the field<br>
|+''Table 1: Table heading''                    <!-- insert Table heading -->
:class="wikitable sortable"  // sorts all lines after the contents of the specific column on clicking
 
<pre>{|border="2" cellspacing="0" cellpadding="4" width="52%" align="left" class="wikitable sortable"
|+''Tabelle 1: Table heading''                    <!-- insert Table heading -->
|-
|-
|bgcolor = "#FFFF99"|'''Column heading 1'''
|bgcolor = "#F0F0F0"|'''Column heading 1'''
|bgcolor = "#FFFF99"|'''Column heading 2'''
|bgcolor = "#F0F0F0"|'''Column heading 2'''
|bgcolor = "#FFFF99"|'''Column heading 3'''
|bgcolor = "#F0F0F0"|'''Column heading 3'''
|-
|-
|bgcolor = "#FFFF99"|row heading 1
|bgcolor = "#F7F7F7"|row heading 1
|bgcolor = "#CCFFFF"|Text
|bgcolor = "#FFFFEO"|Text
|bgcolor = "#CCFFFF"|Text
|bgcolor = "#FFFFEO"|Text
|-
|-
|bgcolor = "#FFFF99"|row heading 2
|bgcolor = "#F7F7F7"|row heading 2
|bgcolor = "#CCFFFF"|Text
|bgcolor = "#FFFFEO"|Text
|bgcolor = "#CCFFFF"|Text
|bgcolor = "#FFFFEO"|Text
|}
|}
<br clear="all">


<br clear="all">                 <!-- has the effect that the text does not flow around the table -->
;Format details for a table with 3 columns and 3 rows<br>
</pre>
:width= "52%"           //  gives the table width as a % of the page width<br>
:align="left"            // flush left, right = flush right, center = centred<br>
:bgcolor = "#F0F0F0"    // gives the background colour for the respective field<br>
:class="wikitable sortable"  // Click for all rows sorted by column content


{|border="2" cellspacing="0" cellpadding="4" width="52%" align="left" class="wikitable sortable"
'''Master copy'''
|+''Tabelle 1: Table heading''  
<br clear="all">
<pre>{|border="2" cellspacing="0" cellpadding="4" width="52%" align="left" class="wikitable sortable"
|+''Table 1: Table heading''                   <!-- insert Table heading -->
|-
|-
|bgcolor = "#FFFF99"|'''Column heading 1'''
|bgcolor = "#F0F0F0"|'''Column heading 1'''
|bgcolor = "#FFFF99"|'''Column heading 2'''
|bgcolor = "#F0F0F0"|'''Column heading 2'''
|bgcolor = "#FFFF99"|'''Column heading3'''
|bgcolor = "#F0F0F0"|'''Column heading 3'''
|-
|-
|bgcolor = "#FFFF99"|row heading 1
|bgcolor = "#F7F7F7"|row heading 1
|bgcolor = "#CCFFFF"|Text
|bgcolor = "#FFFFEO"|Text
|bgcolor = "#CCFFFF"|Text
|bgcolor = "#FFFFEO"|Text
|-
|-
|bgcolor = "#FFFF99"|row heading 2
|bgcolor = "#F7F7F7"|row heading 2
|bgcolor = "#CCFFFF"|Text
|bgcolor = "#FFFFEO"|Text
|bgcolor = "#CCFFFF"|Text
|bgcolor = "#FFFFEO"|Text
|}
|}
<br clear="all">                <!-- has the effect that the text does not flow around the table -->
</pre>
== Yellow Notice ==
If you wish to show a notice in a yellow frame , please use the template <pre> {{Ynotice}}</pre>
It looks like:
{{Ynotice}}
'''Master copy'''
<pre>


<br clear="all">
{{Ynotice|text= YOUR TEXT}}


== Embedding Photos ==
</pre>


To embed a photo in a wiki page, please use this template, add the name of your image and adjust the formatting information, as discussed below.
== Status of an article ==


<pre>[[Image:cpmlete name of the photo|thumb|center|300px|figure 1: text]] </pre>
'''Article to be written'''


{{ArticleToDo}}
Please use the master copy:
<pre>{{ArticleToDo}}
</pre>


'''Image:'''file name - the name under which the image is present in the repository<br>
'''Article in Progress'''
'''thumb''': indicates that the figure smaller as the original size is embedded, in a size that is specified in px = pixel<br>
'''center''': center <br>
'''left-justified ''': left <br>
'''richts-justified''': right<br>


'''300px''' : the image width is 300 pixels<br>
{{UnderConstruction}}
Please use the master copy:
<pre>{{UnderConstruction}}
</pre>


'''Text''': The caption is entered here<br>
==Embedding photos in a text ==


[[Image:HJS Ca(NO3)2 101703-4-4.jpg|thumb|center|300px|figure 1: text]]
To embed a photo in a Wiki page, please use this template, insert the name of your illustration and amend the formatting details, as explained in more detail below.


== Embed Ogg-Videos ==
<pre>[[Image:''full name of the photo''|thumb|center|300px|caption]] </pre>


Since only videos in the format "OGG" may be embedded, only videos in this forma should be uploaded. Many popular video editing programs do not yet offer the OGG format. With the free VLC player an OGG video can easily be created from a standard format. A brief introduction to this:
*'''thumb''': States that the illustration is embedded in a reduced size, given in px = Pixelsl<br>
*'''center''': center <br>
*'''left''': left <br>
*'''right''': right<br>
*'''300px''' : The image width is 300 pixels; can be amended to meet your own requirements
*'''caption''': The illustration caption is entered here<br>
[[Image:HJS Ca(NO3)2 101703-4-4.jpg|thumb|center|300px|caption]]


* start VLC Media Player (if not available, installn)
== Embedding videos ==
* In the menu Media  choose "convert/save"
* With Add choose the file  to be converted
* klick on "convert/save"
* insert in the new menu the name of the target file (z.B. the same name as originally with the extension ".ogg")
* in teh settings choose "Video - Theora+Vorbis(OGG)"
* klick Start
* the video is played and converted


As previously only videos in the format "OGG" were able to be embedded, only videos in this format should be uploaded.


Videos in the format. "Ogg" can be viewed directly on the Wikipage. Enter 
Videos in the ".ogg" format can be viewed directly on the pages. To do this, enter the following:


<pre>[[image:"name of the video".ogg]] </pre>  e.g. <br>
<pre>[[image:"name of the video".ogg]] </pre>  e.g. <br>
Line 243: Line 253:
<pre>[[image:MgSO4_Kristallisationsvideo.ogg]] </pre>
<pre>[[image:MgSO4_Kristallisationsvideo.ogg]] </pre>


Detailed information on the width, etc. as described under "embed photos".
Detailed information on the width, etc., as under "Embedding photos" using, as an example


with <pre>[[image:MgSO4_Kristallisationsvideo.ogg|thumb|300px|Crystallisation of Magnesiumsulfat]]</pre> the video is displayed as shown.
with <pre>[[image:MgSO4_Kristallisationsvideo.ogg|thumb|300px|Figure 1:Crystallisation of Magnesiumsulfat]]</pre> the video will be shown as follows.


[[image:MgSO4_Kristallisationsvideo.ogg|thumb|300px|Figure 1: Crystallisation of Magnesiumsulfat]]
[[image:MgSO4_Kristallisationsvideo.ogg|thumb|300px|Figure 1: Crystallisation of Magnesiumsulfat]]


<br clear=all>
== Weblinks ==


<br clear=all>
<pre><references/>  //all "footnotes" will be shown</pre>


== DynamicPageList  ==
== DynamicPageList  ==


With the expansion "DynamicPageList" you can create lists/tables of all that is indexed by categories.
Using the "DynamicPageList", it is possible to generate compilations of everything that is tagged using categories,
e.g. all pages in the category "Niter" are listed with the following details:


E.g. all pages belonging to the category plaster are listed with the following settings:
<pre><dpl>
<pre><dpl>
category=Gips
  category = Niter
  format  = ,\n* [[%PAGE%]],,
</dpl>
</dpl>
</pre>
</pre>


The list (if input available):
<dpl>
<dpl>
category=Gips
  category = Niter
 
  format  = ,\n* [[%PAGE%]],,
</dpl>
</dpl>


Line 273: Line 290:
Here's an example: With the entries in the "info box" of the nitrate salts  create  a new, sortable table with the columns birefringence, refractive indices, molar volume, solubility and deliqueszenzhumidity.
Here's an example: With the entries in the "info box" of the nitrate salts  create  a new, sortable table with the columns birefringence, refractive indices, molar volume, solubility and deliqueszenzhumidity.


HIerzu gibt man folgende DPL- Anweisungen ein:
The following DPL statements :
<pre><dpl>
<pre><dpl>
category = Nitrat&Salz
category       = Nitrat&Salt
include ={Infobox_Salz}:Doppelbrechung:Brechungsindices:Molvolumen:Deliqueszenzfeuchte:Löslichkeit
include         = {Infobox_Salt}:birefringence:refractive_indices:molvolume:solubility :deliqueszenzhumidity
table=class="wikitable sortable",Salz,Doppelbrechung,Brechungsindices,Molvolumen,Deliqueszenzfeuchte,Löslichkeit
table           = class="wikitable sortable" ,birefringence,refractive_indices,molvolume,solubility,deliqueszenzhumidity
tablerow=%%,bgcolor=lightyellow|%%,bgcolor=lightyellow|%%,bgcolor=lightyellow align=center|%%,bgcolor=lightyellow|%%
tablerow       =%%,bgcolor=lightyellow|%%,bgcolor=lightyellow|%%,bgcolor=lightyellow align=center|%%,bgcolor=lightyellow|%%
suppresserrors  = true
</dpl>
</dpl>
</pre>
</pre>
The resulting table:
You will get the resulting table (if input available):


<dpl>
<dpl>
category = Nitrat&Salz
category = Nitrat&Salt
include ={Infobox_Salz}:Doppelbrechung:Brechungsindices:Molvolumen:Deliqueszenzfeuchte:Löslichkeit
include ={Infobox_Salt}:birefringence:refractive_indices:molvolume:solubility :deliqueszenzhumidity
table=class="wikitable sortable",Salz,Doppelbrechung,Brechungsindices,Molvolumen,Deliqueszenzfeuchte,Löslichkeit
table=class="wikitable sortable",birefringence,refractive_indices,molvolume,solubility,deliqueszenzhumidity
tablerow=%%,bgcolor=lightyellow|%%,bgcolor=lightyellow|%%,bgcolor=lightyellow align=center|%%,bgcolor=lightyellow|%%
tablerow=%%,bgcolor=lightyellow|%%,bgcolor=lightyellow|%%,bgcolor=lightyellow align=center|%%,bgcolor=lightyellow|%%
suppresserrors=true
</dpl>


</dpl>
[[category:templates]]

Revision as of 10:24, 17 March 2017

<accesscontrol>autor</accesscontrol> Here you can find all of the templates previously made available for authors. If you would like additional templates, please contact the administrator at the Hornemann Institute.


Classification of an article in SaltWiki[edit]

Each article tackles a self-contained subject. Explanations of terms can generally be found in the glossary. A Wiki article concentrates on the actual content and is linked to all subjects that are required or are important for understanding the article.
The classification could look as follows (for example, see the article on render/mortar): Each page starts with the page head, as proposed below.

== Abstract ==
== Introduction ==
== Main chapter ==
=== Sub-chapter ===
== Web links ==
== Literature ==

<bibprint/> : to use if at least one quote in Bibtex format is present in the text, 
              otherwise the complete list of references is displayed!


If there are more than three headings, then the software will automatically create a table of contents inserted before the first heading.

Head of a page[edit]

<bibimport/>                 
Author/s: [[user:Hschwarz|Hans-Jürgen Schwarz]]

''back to [[SalzWiki:Portal|SalzWiki]]           
<br>
[[Category:"Topic"]] [[Category:"Author"]] [[Category:"Editor"]] [[Category:"Status"]] 
<bibimport/> Allows quotation from the bibliography
'''Author/s:''' [[user:Hschwarz|Hans-Jürgen Schwarz]] Insert author name here, separated by commas in the case of several. [[User:"Author name"]] links to the author page
back to [[SalzWiki:Portal|SalzWiki]] Optional: go back one level, here to the SaltWiki site
[[Category:"Topic"]] [[Category:"Author"]] [[Category:"Editor"]] [[Category:"Status"]] Categories are very important and must be entered. The categories always appear at the end of a page .


Licences[edit]

In order to insert a licence, you only need to state the short form, including the curly brackets. If you need another licence please contact the admin on his talk page .

Creative-Commons-Licence: CC_BY-NC-SA_3.0[edit]

The template: {{CC-by-nc-sa}}

Name
NoCommercial
SA

This image or file is licensed under the Creative-Commons-License Attribution - Noncommercial - Share Alike Germany in the version 3.0.

You are free:

  • to Share — to copy, distribute and transmit the work
  • to Remix — to adapt the work


Under the following conditions:

  • Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
  • Noncommercial — You may not use this work for commercial purposes.
  • Share Alike — If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one

Notice — For any reuse or distribution, you must make clear to others the license terms of this work. The best way to do this is with a link to the Commons Deed.


Creative-Commons-Licence: CC_BY-NC-ND_3.0[edit]

The template:{{CC-by-nc-nd}}

Name
NoCommercial
SA

This image or file is licensed under the Creative-Commons-License Attribution - Noncommercial - No Derivative Works Germany in the version 3.0.

You are free:

  • to Share — to copy, distribute and transmit the work


Under the following conditions:

  • Attribution — You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
  • Noncommercial — You may not use this work for commercial purposes.
  • No Derivative Works — You may not alter, transform, or build upon this work.

Notice — For any reuse or distribution, you must make clear to others the license terms of this work. The best way to do this is with a link to the Commons Deed.


GNU[edit]

The template:{{GNU}}


GNU

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.


Public Domain Licence[edit]

The template:{{PD}}


PD

This file has been released into the public domain by the copyright holder, its copyright has expired, or it is ineligible for copyright.



Uploading metadata[edit]

The following templates are available for metadata for different files that you may want to upload (there is also a link to them on the upload page)

  • Photos
  • Published articles/books, etc.
  • Grey literature
  • Unpublished reports
  • Scientific primary data
  • DOI metadata

Please copy the relevant template into the upload form and complete it in full

By uploading, you confirm that the uploaded document / file is free of rights of third parties respectively you have permission to use.

Uploading is in the repository. To embed a file (eg a photo) in SaltWiki, you need to know the name of the file in the repository.

Here as an example:

Call up the template using:

{{MetadataPhoto_upload}}

Appearance of the template for photos:

Description {{{description}}}
Source {{{source}}}
Date {{{date}}}
Author/s {{{author}}}
Permission {{{permission}}}
Notes {{{notes}}}


Master copy

{{MetadataPhoto_upload
|description=
|source=
|date=
|author=
|permission=
|notes=
}}

Salts information box: Infobox Salts[edit]

If you want to create the page of a new salt, please use this template for the characteristics. Should the salts information box not have all of the required parameters that you need, please contact the adminor write your required parameter on the discussion page.

Appearance of the template

Templates{{{Footnote}}}
{{{photo}}}
Mineralogical name {{{mineralogical_Name}}}
Chemical name {{{chemical_Name}}}
Trivial name {{{Trivial_Name}}}
Chemical formula {{{chemical_Formula}}}
Other forms {{{Hydratforms}}}
Crystal system {{{Crystal_System}}}
Crystal structure {{{Crystal_Structure}}}
Deliquescence humidity 20°C {{{Deliqueszenzhumidity}}}
Solubility (g/l) at 20°C {{{Solubility}}}
Density (g/cm³) {{{Density}}}
Molar volume {{{MolVolume}}}
Molar weight {{{Molweight}}}
Transparency {{{Transparency}}}
Cleavage {{{Cleavage}}}
Crystal habit {{{Crystal_Habit}}}
Twinning {{{Twinning}}}
Phase transition {{{Phase_Transition}}}
Chemical behavior {{{chemBehavior}}}
Comments {{{Comments}}}
Crystal Optics
Refractive Indices {{{Refractive_Indices}}}
Birefringence {{{Birefringence}}}
Optical Orientation {{{optical_Orientation}}}
Pleochroism {{{Pleochroism}}}
Dispersion {{{Dispersion}}}
Used Literature
{{{Literature}}}


Master copy

{{Infobox_Salt
|Footnote             =
|photo                =  [[Image:"file name"|300px]]
|mineralogical_Name   =
|chemical_Name        =
|Trivial_Name         =
|chemicalFormula      =
|Hydratforms          =
|Crystal_Class        =
|Deliqueszenzhumidity =
|Solubility           =
|Density              =
|MolVolume            =
|Molweight            =
|Transparency         =
|Cleavage             =
|Crystal_Habit        =
|Twinning             =
|Refractive_Indices   =
|Birefringence        =
|optical_Orientation  =
|Pleochroism          =
|Dispersion           =
|Phase_Transition     =
|chemBehavior         =
|Comments             =
}}


Table with table heading[edit]

In order to create a table, you can either use the Editor button or use the following template:

Table 1: Table heading
Column heading 1 Column heading 2 Column heading 3
row heading 1 Text Text
row heading 2 Text Text


Format details for a table with 3 columns and 3 rows
width= "52%" // gives the table width as a % of the page width
align="left" // flush left, right = flush right, center = centred
bgcolor = "#F0F0F0" // gives the background colour for the respective field
class="wikitable sortable" // Click for all rows sorted by column content

Master copy

{|border="2" cellspacing="0" cellpadding="4" width="52%" align="left" class="wikitable sortable"
|+''Table 1: Table heading''                    <!-- insert Table heading -->
|-
|bgcolor = "#F0F0F0"|'''Column heading 1'''
|bgcolor = "#F0F0F0"|'''Column heading 2'''
|bgcolor = "#F0F0F0"|'''Column heading 3'''
|-
|bgcolor = "#F7F7F7"|row heading 1
|bgcolor = "#FFFFEO"|Text
|bgcolor = "#FFFFEO"|Text
|-
|bgcolor = "#F7F7F7"|row heading 2
|bgcolor = "#FFFFEO"|Text
|bgcolor = "#FFFFEO"|Text
|}
<br clear="all">                 <!-- has the effect that the text does not flow around the table -->

Yellow Notice[edit]

If you wish to show a notice in a yellow frame , please use the template

 {{Ynotice}}

It looks like:

{{{text}}}


Master copy


{{Ynotice|text= YOUR TEXT}}

Status of an article[edit]

Article to be written

Pen-64x64.png Authors Wanted! This article is waiting to be written. Pen-64x64.png
Please have first a look to the German SalzWiki. If there is an article on that topic you may start with an English version of it.


Please use the master copy:

{{ArticleToDo}}

Article in Progress


This article will be released soon.

Please use the master copy:

{{UnderConstruction}}

Embedding photos in a text[edit]

To embed a photo in a Wiki page, please use this template, insert the name of your illustration and amend the formatting details, as explained in more detail below.

[[Image:''full name of the photo''|thumb|center|300px|caption]] 
  • thumb: States that the illustration is embedded in a reduced size, given in px = Pixelsl
  • center: center
  • left: left
  • right: right
  • 300px : The image width is 300 pixels; can be amended to meet your own requirements
  • caption: The illustration caption is entered here
caption

Embedding videos[edit]

As previously only videos in the format "OGG" were able to be embedded, only videos in this format should be uploaded.

Videos in the ".ogg" format can be viewed directly on the pages. To do this, enter the following:

[[image:"name of the video".ogg]] 

e.g.

[[image:MgSO4_Kristallisationsvideo.ogg]] 

Detailed information on the width, etc., as under "Embedding photos" using, as an example

with

[[image:MgSO4_Kristallisationsvideo.ogg|thumb|300px|Figure 1:Crystallisation of Magnesiumsulfat]]

the video will be shown as follows.

Error creating thumbnail:
Figure 1: Crystallisation of Magnesiumsulfat



Weblinks[edit]

<references/>  //all "footnotes" will be shown

DynamicPageList[edit]

Using the "DynamicPageList", it is possible to generate compilations of everything that is tagged using categories, e.g. all pages in the category "Niter" are listed with the following details:

<dpl>
  category = Niter
  format   = ,\n* [[%PAGE%]],,
</dpl>

The list (if input available):

Create a new list/table based on tables in different articles[edit]

With the extension DynamicPageList it is also possible to create lists from tables based on the same template according to the variables used there.

Here's an example: With the entries in the "info box" of the nitrate salts create a new, sortable table with the columns birefringence, refractive indices, molar volume, solubility and deliqueszenzhumidity.

The following DPL statements :

<dpl>
category        = Nitrat&Salt
include         = {Infobox_Salt}:birefringence:refractive_indices:molvolume:solubility :deliqueszenzhumidity
table           = class="wikitable sortable" ,birefringence,refractive_indices,molvolume,solubility,deliqueszenzhumidity
tablerow        =%%,bgcolor=lightyellow|%%,bgcolor=lightyellow|%%,bgcolor=lightyellow align=center|%%,bgcolor=lightyellow|%%
suppresserrors  = true 
</dpl>

You will get the resulting table (if input available):