Salt conversion

Author: Hans-Jürgen Schwarz
English version by Sandra Leithäuser
back to Measures

Abstract

Damaging soluble salts can be transformed into less damaging ones by their conversion into insoluble salts. Two methods can be used. The first one converts soluble salts into poorly soluble or insoluble compounds, thus diminishing the number and degree of crystallization cycles. The second one transforms the less soluble salts into far more soluble ones in order to remove them more easily.

Removal of salts by salt conversion

Conservation practice uses various methods for the removal of soluble salts and salt crusts. In the past, acids such as hydrochloric acid or acetic acid were often used to remove calcium carbonate crusts. However, this can lead to subsequent damages if the correct procedure is not followed diligently.[Hammer:1996]Title: Salze und Salzbehandlung in der Konservierung von Wandmalerei und Architekturoberfläche.
Author: Hammer, Ivo
The use of hexafluorosilicic acid has also been documented. The Florentine method [Matteini:1991]Title: In Review: An Assessmant of Florentine Methods of Wall Painting Conservation Based on the Use of Mineral Treatments
Author: Matteini, Mauro
of "gypsum transformation" also includes the dissolution of the gypsum crust with ammonium carbonate. Ion exchangers have been in use for many years to remove crusts.[Pursche:2001]Title: Konservierung von Wandmalerei, Reaktive Behandlungsmethoden zur Bestandserhaltung

Immobilization of salts

Immobilization is the conversion of readily soluble salts into poorly soluble or insoluble salts and thus relatively harmless compounds. This appears to be simple but the problem is that not all ions form highly insoluble compounds, for example, there are no poorly soluble or insoluble nitrate compounds. Furthermore, masonry usually contains a mixture of ions, not only defined salts, such as calcium nitrate or magnesium sulfate. Thus, even when some salts crystallize out, a solution containing these and other ions will also be present. The most common anions are carbonates, nitrates, chlorides and sulfates, the most common cations are sodium, potassium, magnesium and calcium. This leaves chlorides, sulfates and some limited options for carbonates as the only possibilities for an immobilization treatment.

Currently, barium solutions, such as barium hydroxide, are employed most frequently to immobilize sulfates, In the past, this was achieved using lead hexafluorosilicate.

Literature

[Hammer:1996]	Hammer, Ivo (1996): Salze und Salzbehandlung in der Konservierung von Wandmalerei und Architekturoberfläche.. In: Pursche, Jürgen (eds.): Salzschäden an Wandmalereien, Bayerisches Landesamt für Denkmalpflege, 81-106.
[Matteini:1991]	Matteini, Mauro (1991): In Review: An Assessmant of Florentine Methods of Wall Painting Conservation Based on the Use of Mineral Treatments. In: Cather, Sharon (eds.): The Conservation of Wall Paintings: Proceedings of a symposium organized by the Coutrauld Institut of Art and the Getty Conservation Institute, London, July 13-16, 1987, The Getty Conservation Institute, 137-148.
[Pursche:2001]	Pursche, Jürgen (eds.) (2001): Konservierung von Wandmalerei, Reaktive Behandlungsmethoden zur Bestandserhaltung, Bayerisches Landesamt für Denkmalpflege, München