Non-contact temperature measurement: Difference between revisions

From Saltwiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 6: Line 6:
__TOC__
__TOC__


{{underConstruction}}


<!--


== Abstract ==
== Abstract ==
Line 30: Line 28:
== Infrared camera ==
== Infrared camera ==
   
   
<!--[[Datei:Infrarotkamera.JPG|thumb|left|200px|'''Figure 3''' – Infrared camera (Prosepct FLIR)]]-->
<!--[[Image:IR-Idensen-1.jpg|miniatur|hochkant=1.8|'''Abbildung 4''' - Temperaturverteilung in Idensen aufgenommen mit einer IR-Kamera]]-->
The infrared camera is based on the same principles as the infrared thermometer. However, the camera makes a scan of a specific image area, using a cooled semiconductor detector. The individual measurement pixels are electronically converted into a picture.  
The infrared camera is based on the same principles as the infrared thermometer. However, the camera makes a scan of a specific image area, using a cooled semiconductor detector. The individual measurement pixels are electronically converted into a picture.  
The infrared shows things that are otherwise not visible to the naked eye.
The infrared shows things that are otherwise not visible to the naked eye.
Line 56: Line 51:
<biblist/>
<biblist/>


-->
 
[[Category:IR Thermography]][[Category:Temperature Measurement]][[Category:Schwarz,Hans-Jürgen]][[Category:R-HSchwarz]][[Category:R-SLaue]][[Category:inProgress]]
[[Category:IR Thermography]][[Category:Temperature Measurement]][[Category:Schwarz,Hans-Jürgen]][[Category:R-HSchwarz]][[Category:R-SLaue]][[Category:inProgress]]

Latest revision as of 16:21, 27 November 2012

Author: Hans-Jürgen Schwarz

English version by Sandra Leithäuser
back to Temperature Measurement


Abstract

When measuring the temperature of an object without touching it, the heat radiated from the object is used as the quantity to be measured.

Infrared thermometer

Figure 1 - IR-thermometer, hand-held

Infrared (IR) thermometers are a special method to measure surface temperature [1][Bernhard:2003]Title: Technische Temperaturmessung. Physikalische und meßtechnische Grundlagen, Sensoren und Meßverfahren, Meßfehler und Kalibrierung
Link to Google Scholar
. The advantage of these devices is that they are non-contact meters and surface temperature can be measured without delay, i.e. the measurement process does not affect the object to be measured. [2]

Figure 2 – Measurement field of an IR- thermometer

Basis: Thermal or infrared energy is light with a wavelength too large to be seen by the human eye. This energy is the portion of the electromagnetic spectrum, which we perceive as heat/warmth. Unlike visible light, in the world of infrared, every object radiates heat, if its temperature lies above absolute zero. Therefore even very cold objects, such as ice cubes emit infrared radiation. The higher the temperature of an object, the more intense the infrared radiation. It should be noted, that an IR- measuring device measures the emitted radiation. The radiation intensity of a body depends also on its surface structure and its colour, i.e. its emissivity[3]. The measured temperature value therefore needs to be corrected by including the value of the emittance factor. Even though tables with these values are available, the conditions on-site may be unsuitable for the exact determination of the emittance factors and a very accurate measurement may not be possible. Knowledge about the absolute temperature is not always necessary in every case and it does not need to be taken at every point. Knowing the temperature gradient is usually enough. This can be measured accurately, when based on a calibrated surface temperature, as described above. In practice, the person taking the measurement needs to take care to determine the emittance factor as closely as possible. Then the temperature gradient has to be measured, e.g. starting where the surface temperature has already been determined by the contact sensor. Now the IR-thermometer displays the temperature changes of the whole measuring area, provided the surfaces are all made from the same building material.

Some special devices make it possible to focus on a very narrow angle of measurement. Using these, the temperature on frescoed ceilings can be determined without a scaffold or ladder and without touching the fragile surfaces.

Infrared camera

The infrared camera is based on the same principles as the infrared thermometer. However, the camera makes a scan of a specific image area, using a cooled semiconductor detector. The individual measurement pixels are electronically converted into a picture. The infrared shows things that are otherwise not visible to the naked eye. Infrared cameras produce images of the invisible infrared or heat radiation and make precise non-contact temperature measurement possible.


Thermography uses a camera to visualize the thermal energy radiated from an object. .


Figure 3: Picture made with an infrared camera. Alte Kirche in Idensen facing east

Temperature can be displayed in different shades of gray or different colors. The infrared camera gives an overview of all parts of the building and, e.g. thermal bridges can easily be recognized.

WebLinks

Literatur

[Bernhard:2003]Bernhard, Frank (eds.) (2003): Technische Temperaturmessung. Physikalische und meßtechnische Grundlagen, Sensoren und Meßverfahren, Meßfehler und Kalibrierung, Springer, BerlinLink to Google Scholar