Analysis of Salts: Difference between revisions
| Line 20: | Line 20: | ||
=== [[X-Ray Diffraction Analysis (XRD)]] === | === [[X-Ray Diffraction Analysis (XRD)]] === | ||
=== [[Atomic absorption spectroscopy(AAS)]] === | === [[Atomic absorption spectroscopy(AAS)]] === | ||
=== [[Inductive coupled plasma (ICP)]] === | === [[Inductive coupled plasma (ICP)]] === | ||
=== [[Ion chromatography (IC)]] === | === [[Ion chromatography (IC)]] === | ||
=== [[Photometry]] === | === [[Photometry]] === | ||
=== [[IR-Spektroscopy]] === | === [[IR-Spektroscopy]] === | ||
=== [[Raman-Spektroscopy]] === | === [[Raman-Spektroscopy]] === | ||
=== [[Scanning Electron Microscopy]] (SEM) === | === [[Scanning Electron Microscopy]] (SEM) === | ||
=== [[Other Methods]] === | === [[Other Methods]] === | ||
Revision as of 16:12, 17 December 2013
Author: Hans-Jürgen Schwarz
back to Saltwiki:community_portal
Abstract[edit]
To determine the presence of a salt or visible damage from it, a wide variety of analytical methods are used. Methods presented here may allow a qualitative determination of individual ions or salt phasesa and/or quantitative determination of the salt-forming ions. The fundamental principle of each method, its application and advantages are briefly outlined.
Polarized light microscopy[edit]
With the help of a polarizing microscope, the various salts present can be identified through their optical properties. This includes in particular the study of the birefringence and light refraction of the salts. The polarizing microscope differs from a regular microscope in that it has two polarizers - the polarizer and the analyzer. The analyzer is used to recognize the optical properties of a salt by the change of the linearly polarized light due to the salt.
Micro-chemical testing[edit]
Micro-chemical testing allows to identify salts in very small samples. The micro-chemical salt analysis is based on the detection of individual ions in more or less concentrated aqueous solutions. The salts are identified via the reaction products that can be observed with a microscope at magnifications up to 100 times. The method can be used on site.