Micro-chemical test for chloride: Difference between revisions

From Saltwiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 9: Line 9:
== Procedure ==
== Procedure ==
   
   
The drop to be tested is acidified with very little diluted nitric acid (2M) and then a drop of silver nitrate solution is added.
The drop to be tested is acidified with a minimum of diluted (2M) nitric acid and then a drop of silver nitrate solution is added.
If Cl<sup>-</sup> is present a white precipitate of AgCl will form instantly. After exposure to light this will turn brown with time( image 1). Detection limit for Cl- = 0.05µg
If Cl<sup>-</sup> is present a white precipitate of AgCl will form instantly. After exposure to light this will turn brown with time(image 1). Detection limit for Cl- = 0.05µg


== Further observations ==
== Further observations ==
Line 16: Line 16:
If sulfate is present typical silver sulfate crystals can be observed in the test drop.
If sulfate is present typical silver sulfate crystals can be observed in the test drop.


If in addition to chloride, sodium or potassium are present in the solution, typical isotropic cubes of NaCl or likewise isotropic rectangular, cruciform structures of KCl will form near the edge of the drop of the pure salt solution.
If in addition to chloride, sodium or potassium are present in the solution, typical isotropic cubes of NaCl or isotropic rectangular, cruciform structures of KCl will form near the edge of the drop of the pure salt solution.





Revision as of 14:55, 9 June 2012

Author: Christine Bläuer


back to Micro-chemical testing


More information about the necessary equipment and materials see article Micro-chemistry.

Procedure[edit]

The drop to be tested is acidified with a minimum of diluted (2M) nitric acid and then a drop of silver nitrate solution is added. If Cl- is present a white precipitate of AgCl will form instantly. After exposure to light this will turn brown with time(image 1). Detection limit for Cl- = 0.05µg

Further observations[edit]

If sulfate is present typical silver sulfate crystals can be observed in the test drop.

If in addition to chloride, sodium or potassium are present in the solution, typical isotropic cubes of NaCl or isotropic rectangular, cruciform structures of KCl will form near the edge of the drop of the pure salt solution.


Ions that may inhibit the test or affect its sensitivity:[edit]

Iodide and bromide also produce white precipitates with silver nitrate solution, but these ions are not likely to be present in salt efflorescence from buildings.

Literature[edit]

There were no citations found in the article.